Turntable Accessories

Last in stock

Cleaning fluid for cleaning the pickup needle. A brush for gentle cleaning is integrated in the bottle. With this needle cleaner, the precious diamond can be cleaned very easily and naturally gently. Simply clean the pickup with the integrated brush, then let it dry. Regular use will help to extend the life of your records and your diamond. Already finished. Content: 10 ml. Packaging: 1 piece.

€4.12

Item no: 1066A

€4.12

Last in stock

Record needle cleaner Tonar Top Tip with liquid

Tonar TopTip needle cleaner with liquid, combined with the Cleantip Pro high-density carbon needle brush. Regular use will help extend the life of your records and the stylus. Instructions: Unscrew the bottle top and apply one or two drops of liquid onto the TONAR cleantip brush. To clean the stylus tip brush the tip a few times with the brush. Always clean the tip from the back of the cartridge to the front of the cartridge only. Never brush back and forth. You do not have to remove the stylus from the cartridge for cleaning. Packaging: 1 piece.

€14.87

Item no: 1066B

€14.87

Last in stock

Clearaudio Elixir Of Sound stylus cleaner

Elixir Of Sound. Professional stylus cleaning solution (10 ml), with brush. Quality product from Clearaudio. Packaging: 1 piece.

€23.13

Item no: 9126

€23.13

In stock

Tonar Clean Tip - Carbon Fiber Stylus Cleaning Brush

Carbon fibre brush from TONAR for cleaning the stylus. This special, very dense carbon fibre brush sweeps away even the most encrusted dirt, with or without the use of liquids. It is the choice of professionals, studios and DJs! Supplied in a plastic case with cover and foam mat, which can be placed next to the turntable. Always clean the tip from the back of the cartridge to the front of the cartridge only. Never brush back and forth. Length: 60 mm. Packaging: 1 piece.

€8.26

Item no: 1073A

€8.26

Nettoyeur électrique de diamant Flux Hifi Sonic

Last in stock

Flux Hifi Sonic - Electronic Stylus Cleaner

The Flux-Sonic turntable stylus cleaner is designed to remove embedded dirt from the tip of the playback diamond and to make it clean as new. The cleaning is done by a targeted, high frequency vibration action. It is a simple and very fast operation, 15 seconds. It is not necessary to dismantle the styles or the element. It is recommended to clean the diamond before each playback of a record. The process is similar to that of an ultrasonic bath for eyeglass lenses. Both distortion and background noise disappear. The sound reproduction is more dynamic. There are no more annoying high-pitched sounds and high volumes are transmitted without distortion. It is delivered in a box with a pair of batteries and a small bottle of "Flux" (also available separately in our shop). Made in Germany. Packaging : 1 piece.

€110.74

Item no: 9714

€110.74

In stock

Liquid for the Flux-Sonic diamond cleaner

Specific liquid for the Flux-Sonic diamond cleaner. Supplied in a 15 ml bottle.

€32.22

Item no: 9715

€32.22

In stock

LP metal cleaning arm

The metal cleaning arm cleans the record while playing. The arm itself is fully earthed, thereby reducing the build-up of static charge, reducing wear and tear on the record and the needle. At the same time, background noises that arise from static charge energy are suppressed. The cable can be connected easily with the pick-up earthing cable to the amplifier. Included in the delivery: height-adjustable mount with self-adhesive fastening, metal arm with a carbon fibre brush, a brush for cleaning the needle and an earthing cable. Packaging: 1 piece.

€12.39

Item no: 1090

€12.39

Last in stock

Ortofon Level Libelle

Level from the Danish company Ortofon in transparent plastic, which allows you to adjust your turntable so that it is perfectly level. Diameter: 41 mm, height: 11 mm. Colour: transparent.

€8.26

Item no: 9585

€8.26

In stock

Setting and hanging template for headshell system

Plastic template for optimal adjustment of the headshell system. With this model, you can adjust the offset angle (the angle between the longitudinal axis of the cell and the axis of the tone arm) and the advance (or "overhang": the distance between the needle and the axis of the plate). Packaging: 1 piece.

€9.91

Item no: 9120

€9.91

Last in stock

MFSL GEO-DISC Cartridge Alignment Tool

The Mobile Fidelity Sound Lab GEO-DISC stylus alignment protractor makes cartridge setup easy. You will never realize the full potential of your cartridge without properly setting it up, but let's face it: Mounting and aligning a phono cartridge can be a tedious and time-consuming chore. Not with the GEO-DISC. Simply put GEO-DISC on your platter as you would a record, and align your cartridge using the simple printed graph based on the Baerwald alignment curve. It's that easy. Nobody with a turntable or vinyl LPs should be without this essential device. Packaging: 1 piece.

€49.58

Item no: 9120A

€49.58

Last in stock

Ortofon pick-up arm scale

With this pick-up arm scale, you can precisely balance the pick-up arm of your record player and determine the ideal tracking force of your record player. Colour: white. Size: W 12 mm x L 70 mm x H12 mm. Measuring unit: grams. Packaging: 1 piece.

€8.26

Item no: 9586

€8.26

Last in stock

Tonar electronic arm scale for turntable arms

Tonar Trackurate, high precision electronic scale for tone arm. Measuring range up to 5.0 grams, accuracy 0.01 gram. With illuminated LCD display, calibration weight, battery and case. 2 year warranty. Colour: black. Packaging: 1 piece.

€28.92

Item no: 9588

€28.92

Tonar balance pèse-bras électronique pour bras de platine jaune

Last in stock

Tonar electronic arm scale for turntable arms yellow

Tonar Trackurate, high precision electronic scale for tone arm. Measuring range up to 5.0 grams, accuracy 0.01 gram. With illuminated LCD display, calibration weight, battery and case. 2 year warranty. Colour: yellow. Packaging: 1 piece. (Photos avec permission de winyle.pl)

€28.92

Item no: 9587

€28.92

In stock

50 Single spindle adapters

Single record plastic spindle adapters. The adapter units are clamped into the centre hole of the single record. This way, it is possible to play a record on a record-player without a centre piece. Sales unit: 50 units. Colour: black. Material: plastic.

€2.88

Item no: 2034

€2.88

In stock

Single puck made from aluminium

This beautiful single puck made from extra shiny stainless steel is not just for professionals, but also adorns any domestic record player. Colour: silver. Diameter: 38 mm. Height: 11 mm. Weight: 33 grams.

€6.60

Item no: 2038

€6.60

Centreur / adaptateur Acoustic Solid en aluminium poli pour singles 45T

Last in stock

Acoustic Solid puck in polished aluminium for 7 inch singles

Polished solid aluminium puck for reading 45 RPM 7" singles. Diameter: 38 mm, height: 31 mm. Probably the most beautiful puck ever made. The plastic round plate below the puck ensures that the single does not slip under the puck and also that the single can be pulled together with the puck in one movement. Please check before ordering if your deck cover has a 1 mm deepening in the centre. If not, the single is not flat on the deck because of the attached plastic plate.

€31.40

Item no: 2031

€31.40

Centreur coupeur pour élargir trou 45T au format Juke Box

Last in stock

Hole Cutter fo 45 RPM Vinyl "Record Dinker"

With this handy solid metal tool you can enlarge the small hole of a 45 rpm record into a large, perfectly round and clean hole with a diameter of 37 mm, so that the 45 rpm record can be used in a Juke Box. Ideally used with a vice. Packaging: 1 piece. Allen key not included.

€49.58

Item no: 2090

€49.58

Last in stock

Single puck halfround

Luxurious stainless steel puck for playing 7 inch singles. Its 24 mm height makes it easy to remove the puck from the turntable. Diameter: 38 mm, weight: 145 grams.

€9.91

Item no: 2037

€9.91

Last in stock

Single puck top flat conical

Luxurious stainless steel centering device for playing 45 RPM 7 inch singles. Its 2 cm height makes it easy to remove the puck from the turntable. Diameter: 38 mm, weight: 135 grams.

€9.91

Item no: 2036

€9.91

In stock

Black plastic puck triangle for 7 inch singles

Universal black plastic puck for reading 45 RPM 7" singles on the 33T axle. Diameter: 38 mm, height: 8 mm.

€2.06

Item no: 2038B

€2.06

In stock

Tonar No Rumble Pads rubber feet for turntables

Set of 4 rubber feet to put under your turntable. Reduce shocks and vibrations. With a self-adhesive side. Dimensions: diameter 55 mm x height 10 mm.

€9.41

Item no: 9589

€9.41

In stock

Clearaudio Clever Clamp

Simple, yet very effective clamp that fits almost any turntable. A 65 mm diameter plastic disc that slides over and grips the spindle, locking and clamping records into place. Upturned edges on the clamp allow for easy removal after use. There are two distinct advantages to using a record clamp on your turntable. The first is obvious; clamping warped records flat. The second is often overlooked, but sonically far more important. LP records vibrate along with the music as the stylus traces the groove as well as tending to move or bend under the pressure of the arm and cartridge when they are insufficiently supported. A good quality record clamp will not only flatten out warps but also couple the LP tightly to the platter so that internal resonances can be drained away from the stylus - as if the LP is of effectively a much higher thickness and rigidity. This clamp is not compatible with Rega turntables and some turntables with a short axis.

€22.31

Item no: 1075

€22.31

In stock

LP Record Weight 452 gram Vinyl Record clamp

This luxurious solid metal record weight is designed to enhance the contact between the record and the platter. This eliminates many resonances and improves tracking. The support surface is covered with black felt. Weight: 452 grams, diameter 69 mm, height 23 mm. Colour: silver. The clamp is drilled to the standard 7.2 mm diameter with a depth of 20 mm.

€34.70

Item no: 1072D

€34.70

Last in stock

LP Record Weight 760 gram Vinyl Record clamp silver

This luxurious solid metal record weight is designed to enhance the contact between the record and the platter. This eliminates many resonances and improves tracking. The support surface is covered with black felt. Weight: 760 grams, diameter 72 mm, height 30 mm. Colour: silver. The clamp is drilled to the standard 7.2 mm diameter with a depth of 20 mm. Packaging: 1 piece.

€34.70

Item no: 1072C

€34.70

In stock

LP Record Weight 760 gram Vinyl Record clamp black

This luxurious solid metal record weight is designed to enhance the contact between the record and the platter. This eliminates many resonances and improves tracking. The support surface is covered with black felt. Weight: 760 grams, diameter 72 mm, height 30 mm. Colour: black. The clamp is drilled to the standard 7.2 mm diameter with a depth of 20 mm. Packaging: 1 piece.

€41.31

Item no: 1072B

€41.31

Last in stock

Clearaudio "Break In" Test Record

Phono cartridges need a break-in period before they reach their best reproduction capabilities. The length of this period depends, among other things, on the construction of the cell and the types of materials used. This break-in time can usually range from 40 to 100 hours. However, this time can be greatly shortened by using the Clearaudio "Break In" Test Record. The record reproduces a "pink noise" in an infinite groove. Packaging: 1 piece.

€48.75

Item no: 9006

€48.75

Last in stock

Clearaudio Trackability Test Record

The Trackabillity provides information on the sampling characteristics of your tonearm / cartridge combination. The higher the value achieved, the better the relevant tonearm / cartridge combination is to scan difficult groove modulations without distortion. Amplitude accurancy +- 0.1 dB. Packaging: 1 piece.

€48.75

Item no: 9008

€48.75

In stock

Phono Headshell with Lead Wires SME black

Universal pickup shell for mounting on an S shaped arm with Ortofon/SME mount. Delivered with cabling. Material: aluminium. Colour: black. Packaging: 1 piece.

€8.26

Item no: 9592

€8.26

Coque porte-cellule standard pour bras S Argent

In stock

Phono Headshell with Lead Wires SME silver

Universal pickup shell for mounting on an S shaped arm with Ortofon/SME mount. Delivered with cabling. Material: aluminium. Colour: silver. Packaging: 1 piece.

€8.26

Item no: 9595

€8.26

In stock

Tonar screws for headshell mounting

Tonar mounting kit for headshell. 2 pieces M2.5 screws each 3, 6, 8, 10, 12, 14, 16, 18 mm with 16 nuts.

€8.26

Item no: 9607

€8.26

In stock

DOS Lead wires headshell cables

4 coloured lead wires for wiring the cartridge to the headshell mount, with gold-plated contacts.

€4.95

Item no: 9591

€4.95

Last in stock

Audio-Technica AT6101 connecteurs fils pour coquille porte-cellule

4 fils de connexion en couleur pour le câblage de la plupart des cellules sur la coquille porte cellule, avec contacts en plaqué or. Audio-Technica, référence AT6101. Fabriqué au Japon.

€11.56

Item no: 9594

€11.56

Last in stock

Clearaudio Polishing Paste (2ml)

The highly effective polishing paste of Clearaudio easily removes little scratches from acrylic surfaces. 2ml in a syringe.

€18.17

Item no: 9716

€18.17

Last in stock

Clearaudio Clear Contact

Clearaudio "Clear Contact". Cleans all electronic contact parts and improves audio and video quality. Packaging: 1 bottle with brush, 5 ml.

€27.26

Item no: 9717

€27.26


PHP_SESSID	www.planetedisque.com	The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.	Session
PrestaShop-#	www.planetedisque.com	This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.	480 hours